Revision history [back]

Hi.

I got a case with filling mass (kvarts stone) in to a silo;

The silo is fed from a moving convayerbelt running on one axis, through the center, above the silo. I want to minimize the drop height (from convayor to top(peak) of the mass) to minimize damage to the kvarts.(wich is very porous). Today there are installed a standard one lence 1080p color survaillence camera, and the optimum convayer position is determined manually by a operator.

Do you guys know if there is possibility to extract coordinates of the mass peaks through the 2d video available? Or can it be realized by implementing more cameras? Do you have any FAQs on the subject?

Silo dimensions; D20xW20xH30m, mass height ca 35m determined by angle of repose.

Thank you for reading and please ignore my bad english.

Hi.

I got am trying to solve a case with problem involving filling mass (kvarts stone) in to into a silo;silo.

The silo is fed from a moving convayerbelt convayor belt running on one axis, through the center, above the silo. I want to minimize the drop height (from convayor conveyor to top(peak) top/peak of the mass) to minimize damage to the kvarts.(wich kvarts (which is very porous). Today there are is installed a standard one lence single lens 1080p color survaillence camera, and surveillance camera with the optimum convayer conveyor position is determined manually by a an operator.

Do you guys know if there is the possibility to extract the coordinates of the mass peaks through the 2d video available? video? Or can it be realized by implementing using more cameras? Do you have any FAQs on the subject?cameras?

Silo dimensions; dimensions: D20xW20xH30m, mass height ca 35m ~35m determined by angle of repose.

I am trying to solve a problem involving filling mass (kvarts stone) into a silo.

The silo is fed from a moving convayor conveyor belt running on one axis, through the center, above the silo. I want to minimize the drop height (from conveyor to top/peak of the mass) to minimize damage to the kvarts (which is very porous). Today there is installed a standard single lens 1080p color surveillance camera with the optimum conveyor position determined manually by an operator.

Do you know if there is the possibility to extract the coordinates of the mass peaks through 2d video? Or can it be realized by using more cameras?

Silo dimensions: D20xW20xH30m, mass height ~35m determined by angle of repose.