Detect bends in connector on PCB board

asked 2019-06-30 22:40:57 -0500

Shobna gravatar image

Hi, I have a problem with detecting the bends in connectors on a PCB board.So far, I have tried but the USB webcam cannot detect the bends in connectors. Have anyone did similar project and can share some experiences. Any improvement will do. As an example, as shown in the picture below, the objectives is need to detect the bends in connectors.image description

edit retag flag offensive close merge delete



Are you saying that these connectors marked red are actually bent?

Witek gravatar imageWitek ( 2019-07-01 19:20:49 -0500 )edit

The connectors marked red is just an example, imagine the connectors marked red legs is bend, so the objective is how to detect the bend.

Shobna gravatar imageShobna ( 2019-07-01 19:42:46 -0500 )edit

My imagination sucks.... post an example image (of bent connectors). Are these connectors scattered all over the place when you take a picture or you can make sure they will be at least oriented repetitively?

Witek gravatar imageWitek ( 2019-07-02 18:01:52 -0500 )edit